I have a 97 acura CL 2.2 with 100 thousand miles. I recently bought it from someone else so I don't know what has been done and what hasn't. There is a growling noise. It is most noticeable when driving around 20 or 30 miles an hour, but it is noticeable at higher speeds as well. I tried to swerve from side to side to see which side the bearing was on, and the sound doesn't change. Had the car looked at by a couple of mechanics, one checked the wheels for play up and down (12 and 6) and couldn't find much if any.
There is also a clicking noise coming from somewhere when you turn and accelerate. It happens most often when turning left, and sometimes when turning right. Especially when accelerating from a stop and turning left like pulling out onto a road, at about a 45 degree angle.
There isn't any bad vibration, even at freeway speeds. Also it doesnt get better or worse with application of the brakes. I know the back brakes need work, but it doesn't sound like grinding; more of a howling.
I thought halfshafts and wheel bearing. Had firestone diagnose. They said transmission had spun a bearing, and thats where the axel noise was coming from too. I had the transmission rebuilt by a different shop for a lot less money. they said that the bearings in the tranny were good, clutch was burnt up, so rebuilt anyway.
Both the bearing noise, and the clicking noise are back, but at least now my tranny shifts smooth.
What's going on? One halfshaft was fairly new, but I heard a lot of remanufactured halfshafts are junk anyway and fail often. How can i tell which wheel bearing is bad? How can I be sure it's halfshafts? Do wheel bearings sometimes fail and the sound doesn't change when you load or unload the wheels? Help Please!Wheel bearing 97 Acura cl?
ur bearing(hub) is the problem with the bearing noise the half shaft and bearing need to be changed at the same time.halfshaft will get rid of the clicking the bearing will get rid of the noise(change both sides at the same time)
